Showing posts with label cheeseboards. Show all posts
Showing posts with label cheeseboards. Show all posts

Monday, 11 April 2016

Spring


This April has felt more like winter then this past Christmas. It snowed and rained ice yesterday and when you finally arrive at spring after having the wood stove on for almost 6 months, you start to ache for some warm sunshine. 

Things are looking up today. Warm breeze and sunshine. I'm sure we appreciate spring so much more  after a sheet of ice covered the van the day before. 

There is something great about seeing things change...


The step between rough cut/router board (thank you strong husband) to smooth as silk finished board is where the hours get put in. In order to get away form the 'machined' look, I use a hand rasp to smooth out all the edges and add curves to the handle. The hole in the handle gets dressed up with the carving knife and then five sanding follow. After a rough 80 grit paper the board is wet to raise the grain and then is left to dry. Next comes 150 and so on until a wet/dry 2000 grit finishes the board off.  At this point it is incredibly smooth and ready for the beeswax/mineral oil finish. It's a process that takes time but by using the hand tools, each board turns out a bit different and unique. 

An enjoyable process!


Almost as enjoyable as spring!
















Friday, 18 March 2016

Cherry board for serving fresh sage scones

This is the last board to come from the nicest, thickest piece of cherry found at a backyard mill in Sylvan. The board was finished right when the scones came out of the oven so we put it right to work! Certainly not planning to blog much about recipes because I am certainly not a cook but these turn out great every time and smell amazing. I've switched it up a bit from the the recipe found here: Fresh Sage Drop Scones


2 cups spelt or whole wheat flour
2 teaspoons baking powder
1/4 teaspoon salt
1/4 teaspoon black pepper
1 cup sharp cheddar cheese
1/4 cup minced green onions
2 tablespoons fresh herbs on hand or
2-3 teaspoons sage and apple stuffing seasoning mix from Epicure (yum!)
1 cup milk

Preheat oven to 400 degrees
Combine flour and next three ingredients. Stir in cheese , onions and herbs. Add milk and stir just until moist. (I needed to add a bit more flour so the dough was not too sticky.) Drop dough onto backing sheet 2 inches apart. (This makes 8 scones.) Bake at 400 for 20 minutes or until golden brown. 




Cherry might appear a bit boring before it gets oiled but it is very beautiful after all the sanding is finished. 

Pure...plain and simple. Real. 

Maybe it would be good if we all tried to be a bit like sanded cherry!





Sunday, 7 February 2016

Sunday afternoon

Enjoying Sunday at home and feeling blessed to warm up an apple pie from the freezer. Being one who is not fond of baking, apple pie as a Christmas gift from my Mom is awesome. :) So happy with the linens I ordered from Etsy to help me photograph the spoons and boards. I found these kitchen towels from Lost in Linen and love them. Linen, wood and pottery....beautiful gifts!


Tuesday, 15 December 2015

Diamond in the Rough.

Another beautiful piece of wavy walnut this time cut into a square. I had high hopes for this piece and enjoyed working with a new shape...until I sanded it down and found a hard, white stone/mineral? embedded into the wood. My critics (family) suggest an end to the board at that time but I think it still has lots of potential. It reminds me of a large chunk of chocolate! Will be a nice serving or chopping board and I'll be packing it up for a friend shortly. :)








Thursday, 19 November 2015

Tuesday, 17 November 2015

November sun

I can't imagine a nicer November for someone who is not entirely fond of being cold...at all. Sanding on the front step in the full, warmish sun is so much nicer then sanding in the cold garage. Trying to make the process go a little quicker in order to get some boards ready for Christmas! I've been grateful to have Jason jigsaw out a bunch for me and do a rough router on the edges. I begin the first sanding and then hand rasp all the edges and handles to get them unique and smooth.


It's hard to get the boards finished at a quicker pace then one every two or three days but I am trying to get a number of these new ones finished for a Christmas open house at the cutest little studio in Camlachie. http://www.lakelifestudio.com 



These boards are all at a different stage....waiting for rasping, sanding and oiling. Then off to join a Christmas party somewhere with some special cheese, breads, meats and nuts. :) 





Tuesday, 10 November 2015

Sanding

Enjoyed most of yesterday morning with almost uninterrupted time sanding which was so refreshing... covered from head to toe in sawdust but still refreshing! Raw, un-oiled cherry and walnut roughly sanded and waiting for five more and a bath between each one. The hardest part is over though. :)


Sunday, 8 November 2015

Cutting

I wasn't too disappointed to find a small crack in the bottom of this board as I was sanding it because that meant I could keep it for myself! We use this board almost every day for cheese and crackers as a bedtime snack or for holding toasted gouda sandwiches for lunch. I have been selling these boards as cheeseboards or bread boards and have advised folks to stay away from cutting on them...until I practice on one to try it out!


I have been cutting on this board with a serrated knife to see how it would hold up. So far what I have noticed is that the knife marks show for a time and then slowly seem to fade, or possibly pull up. I have recently read that using one side for cutting and the other side for serving can help make the boards more multi purpose and I love this idea. I don't think I would chop a raw chicken on them but cutting some veggies, cheese or bread with a sharp knife will be just fine. The more use the better! 


Sunday, 25 October 2015

Cheeseboards

After learning how to use a rasp, most of the cheeseboards have a soft curve to the edge which I think adds to the handmade look of them. The handles are either curved with the rasp or carved with a knife and then the sanding starts. After sanding with a low number, the board is wet and left to dry which raises the grain, resulting in a fuzzy board. Next, a higher number sandpaper is used and then wet again. This process happens about five times before the final oiling. A homemade blend of beeswax and mineral oil gets soaked into the board and wiped off after a few hours. A silkie smooth finish is the result! 


Before carving cheeseboards I was only familiar with cheddar and gouda. Not a very large cheese knowledge but making the boards was a good reason to start to learn. The problem with learning about cheese and the varieties available makes it hard to go back to cheddar!